Description
Specification: 100% TESTED 100% WORK AND PASS THE NOISE TEST
Power: DC5V 0.5A
Unit: PCS
Type: Laptop CPU Fan
Condition: Brand New
Warranty: 3 Months
Info: (3-wire) 3-pin connector
How to Replace Toshiba Satellite L600-01B CPU Fan
In this guide I explain how to disassemble a Toshiba Satellite L600-01B laptops. Also, you should be able to use this guide for taking apart a Toshiba Satellite C630 C640 L600D L640 L640D L645 L645D series laptops.
1. Before you start, make sure the laptop Toshiba Satellite L600-01B is turned off and battery removed. Loosen (don’t remove) five screws securing the hard drive and memory covers. Remove both covers.
2. Under the covers you’ll find the laptop hard drive, both memory modules, wireless card and CMOS battery. Slide the hard drive assembly to the left and disconnect it from the motherboard. Lift up and remove the hard drive.
In order to remove the memory module, spread latches on both sides of the memory slot until the memory module pops up at a 30 degree angle.
Carefully pull the memory module from the slot. Remove the second memory module using same technique.
Remove one screw securing the DVD drive. Carefully pull the DVD drive from the laptop and remove it.
3.Disconnect both antenna cable from the wireless card. Remove two screws securing the wireless card. Pull the wireless card from the slot.
4. unplug the DC jack cable from the motherboard.
5. Remove all screws from the bottom of the laptop. Unroute wireless card antenna cables. Open the computer and remove the keyboard bezel and keyboard. You can refer to the post How to Replace Toshiba Satellite C600 C640 L600 L640 L640D L645 L645D L745 L745D keyboard.
6. Remove all screws securing the top cover assembly.
Disconnect the touch pad cable (Left). Do it same way you disconnected the keyboard cable.
Disconnect the speaker cable (Right). Simply unplug the black connector from the white connector.
7. Lift up and remove the top cover assembly from your Toshiba Satellite L600-01B.
8. Unplug the video cable connector from the motherboard.
Pull wireless card antenna cables though the opening in the laptop base.
Disconnect the power button cable from the motherboard.
Unplug the VGA board cable from the motherboard.
Remove three screws securing the motherboard.
9. Remove four screws securing display hinges. Two screws each side.
10. Lift up and remove the display panel assembly from Toshiba Satellite L600-01B.
11. Remove the mainboard from the base.
12. Loosen seven screws securing the heatsink and disconnect the cooling cable. Then you can remove the Toshiba Satellite L600-01B fan assembly.
13. Normally, the heatsink doesn’t need to be replaced. You can unscrew the two screws and take part the fan from the heatsink.
Reverse the procedure to assembly your Toshiba Satellite L600-01B. Please don’t forgot to add new thermal grease before you install the heatsink.
Replaces the Following Manufacturer Numbers:
DFS491105MH0T
Fits the Following Models:
Compatible Models: Toshiba Satellite L600-61B, Toshiba Satellite L600-7, Toshiba Satellite L645D-S4050GY
View DFS491105MH0T Laptop CPU Fan All Details...
Tags: DFS491105MH0T
