For Tamokura Fujikura Btr-10, FSM-12S, 21S, 22S Fusion Splicer S015527 battery

Type: Lithium-ion battery

Output voltage: 14.8v / 14.4v

Battery capacity: 2.0ah / 3.4ah

Battery charger charger: adc-19

Estimated battery cycle life: up to 500 cycles

Battery capacity indicator: View battery indicator on the machine screen

Operation conditionl: -10 + 50 degrees C /

Dimensions (mm): 08W x 69D x 11H / 83W x 66D x 19H

Weight: 0.17kg / 0.20kg

Applicable machine model: FSM-12S, FSM-21S, FSM-22s

130 times of fusion heating cycle can be maintained with BTR-10 battery

Fujikura 12S, 21S/22S discharge correction operation guide

1. When there is a big change in temperature, altitude and humidity;

2. Fuse or weld when discharging;

3, tensile test broken fiber;

4. The fusion splicer indicates that the discharge power is too strong or too weak;

5. The welding loss is large. (Cleaning the objective lens and V-groove before performing discharge calibration)

1. Turn on the phone and press “Enter” to enter the “Menu”.

2. Press the “SET” button four times to switch to “Maintenance Menu 2”.

3. Press the “down” button twice to select “Discharge Correction”.

4. Press the “Confirm” button to enter the “Discharge Correction” menu.

5. Follow the prompts to make the left and right fiber into the fusion splicer.

6. Press the “Confirm” button to start the discharge calibration.

7. If it is not suitable, please press “Confirm” to try again. Never press other buttons.

8. Follow the prompts to make the left and right fiber into the fusion splicer again, and press the “Confirm” button to start the discharge calibration again.

9. Until the display shows “OK”, the discharge correction is completed. Press the “RESET” button to exit the menu.

Product show